Phaetus Dragon Hotend

Author: MAGICPHOENIX 215 views

Dragon Hotend

Difference between ST and HF

Compared with ST, HF version has higher flow(just like its name), like V6 volcano.

It means if you want print at 150mm/s or higher and use a 0.6mm nozzle or larger, you should choose HF version.

Or ST is fine, in our test, it can print PLA/ABS at 150mm/s with a 0.4mm nozzle.

In other words, if you don’t know which one you should choose, then just go with ST version.


Standard Flow

High Flow

Leave a Comment

On this page